October 1, 2026
2026 Interim Guidance on PFAS Destruction and Disposal
Per- and polyfluoroalkyl substances (PFAS), often called “forever chemicals,” pose significant waste-management challenges because of their bioaccumulative and environmentally persistent properties. EPA recently released its 2026 interim guidance on PFAS destruction and disposal, an update to its previous 2024 guidance, discussed in a previous article. In its 2026 version, the agency provides updated information on technologies that can destroy PFAS or prevent their release into the environment, focusing on three large-scale management approaches: thermal treatment, landfills, and underground injection. This non-binding, non-regulatory guidance is intended to help regulators, the regulated community, and the general public evaluate effective PFAS management options that reflect the current state of science and associated uncertainties.
Thermal treatment involves destroying PFAS in hazardous waste combustors (HWCs), such as commercial incinerators, cement kilns, and lightweight aggregate kilns. Since 2024, new research shows that combustion at higher temperatures and longer residence times is more effective at destroying PFAS and controlling products of incomplete combustion. However, because PFAS are specifically designed to be heat-resistant and thermally stable, uncertainty remains about the effectiveness of thermal treatment. EPA has developed new analytical methods (OTM-45 and OTM-50) to evaluate PFAS destruction in HWCs, which, depending on the combustor’s permit, will have 99.99 to 99.9999 percent destruction and removal rate efficiency requirements.
For landfill disposal, the agency continues to recommend RCRA Subtitle C hazardous waste landfills, as these landfills incorporate the most stringent engineering controls and practices for containment to minimize PFAS releases through leachate and landfill gas. However, across all landfill types, new information indicates that landfilling could result in higher PFAS releases to the environment than previously thought. Because reliable toxicity and transport data are available for only a small number of PFAS, improved sampling and analytical methods are needed to better characterize the fate, transport, and transformation of PFAS within landfills.
Class I underground injection wells are another potential option for land disposal. These wells are typically drilled thousands of feet below the lowermost underground source of drinking water to isolate injected fluids. Unfortunately, the limited number of wells currently receiving off-site PFAS, along with associated transportation logistics, limits the types and quantities of PFAS-containing fluids suitable for underground injection. Another significant issue is the permit modification requirement for Class I hazardous waste injection wells required to accommodate PFAS-containing liquids. Though PFAS are not federal hazardous waste, such disposal facilities would still need to undergo engineering and scientific evaluations, modeling, and public hearings before receiving PFAS.
In addition to established technologies, the guidance mentions emerging PFAS treatment approaches, including mechanochemical degradation, gasification and pyrolysis, and supercritical water oxidation. These technologies show promise but require additional testing to analyze performance. EPA also developed a technology evaluation framework that provides a consistent, transparent method for assessing destruction and disposal technologies, including considerations for affected communities. The agency plans to continue updating its PFAS guidance annually as new research becomes available.
©2026 McCoy and Associates, Inc. All rights reserved. McCoy does not use artificial intelligence (AI) in its writing and publishing.
McCoy and Associates has provided in-depth information to assist environmental professionals with complex compliance issues since 1982. Our seminars and publications are widely trusted by environmental professionals for their consistent quality, clarity, and comprehensiveness.
Disclaimer
Considerable care has been exercised in preparing this document; however, McCoy and Associates, Inc. makes no representation, warranty, or guarantee in connection with the publication of this information. McCoy and Associates, Inc. expressly disclaims any liability or responsibility for loss or damage resulting from its use or for the violation of any federal, state, or municipal law or regulation with which this information may conflict. McCoy and Associates, Inc. does not undertake any duty to ensure the continued accuracy of this information.
This document addresses issues of a general nature related to the federal environmental regulations. Persons evaluating specific circumstances dealing with the environmental regulations should review state and local laws and regulations, which may be more stringent than federal requirements. In addition, the assistance of a qualified professional should be enlisted to address any site-specific circumstances.